Technical Toolboxes Inc. - Pipeline Software Training

Hot-Tapping of Pipelines Practices & Procedures (Including Hot-Tap Cooling Rate Model® Training)- Austrailia
September 13, 2010

Information regarding PRCI Thermal Analysis Model for Hot-Tap Welding Software (View pdf)

Download Registration Form >>

Pipeline Crossings Practices and Procedures – An Overview of New Highway and Railroad Crossings and Temporary Crossings Over Existing Pipelines
September 14, 2010

Download Registration Form >>
Register On-line >>

Hot-Tapping of Pipelines Practices & Procedures (Including Hot-Tap Cooling Rate Model® Training)- Austrailia
September 15, 2010

Information regarding PRCI Thermal Analysis Model for Hot-Tap Welding Software (View pdf)

Sept. 15-16 class is full, contact training@ttoolboxes.com to register for the Sept.13-14 class

RSTRENG – Remaining Strength of Corroded Pipe Historic and Current B31G Criterion, a Level 2 Procedure
September 15, 2010

Download Registration Form >>
Register On-line >>

Pipeline Crossings Practices and Procedures – An Overview of New Highway and Railroad Crossings and Temporary Crossings Over Existing Pipelines- Mansfield, Australia
September 17, 2010

Download Registration Form >>

Pipeline Project Management - From Concept and Design through Completion
October 5, 2010

Download Registration Form >>
Register On-line >>

API 653 - Data Analysis & Reporting Training
October 19, 2010

Download Registration Form >>
Register On-line >>

RSTRENG – Remaining Strength of Corroded Pipe Historic and Current B31G Criterion, a Level 2 Procedure
October 26, 2010

Download Registration Form >>
Register On-line >>

Pipeline Crossings Practices & Procedures
October 27, 2010

Download Registration Form >>
Register On-line >>

Internal Corrosion And Its Control in The Oil and Gas Industry - 3 Day Course
November 9, 2010

Download Registration Form >>
Register On-line >>

Understanding API 1104 - Guidelines for Interpretation and Application
December 7, 2010

Download Registration Form >>
Register On-line >>

Cathodic Protection (CP) Design For Pipelines and Storage Tanks - Willoughby
December 9, 2010

Download Registration Form >>
Register On-line >>

Gas Gathering Pipelines Regulatory Overview & Compliance - 1.5 day
December 14, 2010

Download Registration Form >>
Register On-line >>

General Information N.B. Sept. 15-16 class is full, contact training@ttoolboxes.com to register for the Sept.13-14 class

Hot-Tapping of Pipelines Practices & Procedures (Including Hot-Tap Cooling Rate Model® Training)- Austrailia

September 15, 2010 to September 16, 2010
Mansfield - Australia
http://www.technicaltoolboxes.com/

For more information, contact TTI Training at 713-630-0505 ext 214 or training@ttoolboxes.com

To register for this course, please contact TTI Training at 713-630-0505 ext 214 or training@ttoolboxes.com

Once you have registered for a course, please call in to verify that the course you register for has enough attendees signed up to guarantee it will be held as scheduled before making your travel arrangements.

Information regarding PRCI Thermal Analysis Model for Hot-Tap Welding Software
(View pdf)

About This Event

This course describes the concerns, design implementation, inspection, and testing of in-service welds. In addition to the lecture portion, the course is designed to enable participants to successfully run Hot Tap® weld cooling rate prediction software and interpret the results. The PRCI Hot Tap® software is applicable to pipelines that contain a variety of different pressurized gases or liquids. The first portion of the course provides participants with an understanding of the factors that contribute to burn-through or cracking. The second part of the course teaches participants the details of how to use and interpret the results of the program. Participants will also learn the highlights of various technical resources that supplement the Hot Tap® program to provide a more comprehensive body of technical information pertaining to welding onto operating pipelines.

This course will address in-service welding onto gas and liquid pipelines under both typical and non-typical conditions, with particular emphasis on regulation.compliance review, recommended practices and case studies.

Who Should Attend:

- Welders

- Engineers, technicians, and service professionals involved with construction, maintenance, inspection, and repair of liquids, gas, and products pipelines

- Project managers with oversight for third party engineering or maintenance

- Project and facility managers concerned with system integrity and maintenance

Day 1: time 8:15 am to 5:00 pm.
Day 2: time 8:15 am - 12 pm.
Lunch included.

click here to See Brochure for full class outline.

Venue Information

APA Group View Venue pdf.
11 Dividend Street
Mansfield
Q 4122
Australia

Phone: n/a

9 k from the centre of Brisbane

Return to Events

Rev: January 31, 2006 (cf)

Search | Contact Us

© Technical Toolboxes Inc. All rights reserved \| Privacy Statement